Grand siding metal siding

Siding decoration is the fastest, easiest and most affordable way to give any building a bright and modern look. According to the range of colors and textures, not a single traditional finishing material can be compared with siding, so designers and architects turn to it quite often. Siding is indispensable in cases where it is necessary to refresh the old building. It will allow replacing the worn-out, time-dirty facade with a new, clean and colorful one with little time and labor. Installation of conventional finishing material would require removal of the old coating.

In addition to the aesthetic effect, siding provides a solution to a number of practical problems:

• Protects the exterior walls of the building from atmospheric effects and solar radiation
• Allows you to create a ventilated facade that effectively removes moisture from the exterior walls of the building
• Allows you to create a well-protected space between the finishing material and the wall, in which you can place any type of thermal insulation material
• Reviews about Grand Line siding say that it effectively hides all bumps, chips and other wall defects

Modern protective coating makes siding absolutely resistant to any external influences. Due to its ductility, it perfectly tolerates temperature fluctuations, does not crack and does not delaminate under the most adverse conditions, regardless of the operating life.

Installation of this finishing material can be carried out at any time of the year and in the most adverse weather. At the same time, due to its low weight, siding cladding does not create a significant load on the walls of the building, therefore it can be used on facades of any area.

Grand Line company: domestic production with world quality standards

Grand Line is a dynamically developing Russian company. In a short time, she managed to gain a leading position in the field of production of building materials. The manufacture of siding is only one of the activities of the company. Gutter systems, metal tiles and steel fencing from Grand Line are very popular. All products meet the requirements of world quality standards, as evidenced by a number of certificates. Raw materials, components and technologies used in production are provided by renowned developers with extensive experience and impeccable reputation.

All seven factories built by Grand Line in a surprisingly short period of six years have the most modern equipment manufactured by the best manufacturers from Europe and the USA. But the Grand Line would not have become a leader if it had allowed itself to stand still. The equipment park is constantly being improved and updated in accordance with the requirements of the time; the most advanced developments in the field of production equipment, after proper testing, are immediately applied in production lines at the company's plants.

GrandLine siding

Grand Line enterprises have mastered the production of two types of siding: metal and vinyl.

Reliable and durable finishing material that can easily withstand the most severe climatic conditions. In addition to the cladding panels, the manufacturer offers a number of additional parts to sheathe the surface of the most complex shapes.

Various models of metal siding from Grand Line differ in the type of protective polymer coating, as well as its color, texture and thickness. The warranty period provided by the manufacturer for siding with HPS 200 coating is 20 years. The service life of PVDF and Armacor coated panels is 30 years.

Each type of polymer coating is available in a wide range of colors, numbering up to 50 shades. In the case of scratches during the installation of the siding, the customer can purchase a cylinder with branded paint, which will make the defect invisible and exclude the possibility of corrosion of the metal base. The price of metal siding Grand Line is from 373 rubles / sq.m.

The most popular types of metal siding are “Shipboard” and “Vertical GL”.

• The “shipboard” imitates wood sheathing very precisely, repeating all the details characteristic of this material, the randomness of the texture and the features of the seam
• Vertical GL is the best option for cladding houses facing facades onto busy streets. The features of its texture prevent the formation of mud and allow washing the facade with minimal time and labor

The Grand Line metal siding is equipped with a snap lock, which provides a tight connection of adjacent panels.

Vinyl siding Grand Line

This kind of siding is made on imported equipment. For its manufacture, high-quality raw materials of American and European production are used. Special SunProof GLTM technology provides high resistance of UV siding of Grand Line vinyl siding, which is confirmed by the certificate of the famous European laboratory Holland Colors. No less attention is paid to the impact resistance of siding: thanks to the ShockProof GLTM system, the impact test at a temperature of -10 ° C was 4.23 J. This figure corresponds to the best world analogues. Do-it-yourself will be able to carry out the installation of vinyl siding.

• A kind of vinyl siding “Ship beam” accurately imitates a wooden surface, and even such characteristic details as knots can be seen in the figure of each facing panel. Special processing of the end surfaces provides the most tight contact between the panels during installation
• The siding model GL "Karelsky" has not only a pattern, but also the shape of a wooden beam. This is ideal for decorating a private house or industrial building, giving the building a stylish and interesting look.
• Siding GL "Siberian" has a shape that provides the most compact packaging, which is very important when transporting facing sets over long distances. Another advantage of this brand of siding is the minimum amount of waste when finishing surfaces of any complexity

Color palette

The color scheme of Grand Line siding has more than 50 colors and shades.

The model “Karelian beam, for example, is available in beige, caramel, vanilla colors. There is also a bog oak siding. And the “Siberian beam” model can be gray, light green, peach and white. Color affects the cost of the material. The most expensive are the color stained oak. For example, the price of vinyl siding Grand Line "Karelian" in the color of vanilla or beige is 160 rubles / pc, and the color of bog oak is 243 rubles / pc.

Grand Line Vinyl Siding Color Palette

Sizes and price of siding Grand Line

Obviously, Grand Line siding is the best solution for facing newly constructed and reconstructed buildings. Choosing products of this brand, you get affordable material that is not inferior to the best world analogues.

Before buying a siding, you should calculate the area of ​​the walls of the house, from which the areas of all openings are deducted. Knowing the dimensions of the siding (length and width), you can calculate the material. To do this, the resulting wall area of ​​the house must be divided by the area of ​​one siding panel. Perform the calculation of siding at home (online) will help this article. It contains a detailed description of the calculation, the size of the siding and additional elements.

Siding Grand Line (Russia)

We will send any Grand Line siding throughout Ukraine (except Crimea, Lugansk and Donetsk) through Delivery, Intime, New mail. Shipment from 1 pc.

Grand Line is a fairly large and powerful manufacturer of building materials in the Russian Federation. To date, this giant has 7 plants in the territory of central Russia. There are over 50 branded sales offices and more than 7500 offices from manufacturer dealers. Grand Line operates in 7 areas of production for construction in private, cottage and industrial purposes:

• vinyl siding and spotlights - Grand Line wall siding price D4,4 America and Grand Line America wall panels (go to the Ukrainian market), vertical siding S6,3 Grand Line, wall block house D4,8 Grand Line, wall D4 Grand Line and Spot perforated spotlight Premium GL Estetic
• Decking - roofing, wall, figured and fencing
• metal siding - EcoBrus, Block house, Shipboard, Vertical
• metal tile - Quadro Profi, Kvinta, Country, Classic
• gutter systems - Grand Line 125/90, Grand Line 150/100, Optima, Rohrfit Meister
• fencing systems - modular, panel, temporary. Metal picket roll mesh
• related products - caps, peaks, greenhouses

This is a brief overview of Grand Line's products. The manufacturer’s website has complete information.

But back to the Grand Line vinyl siding. As you already know, so far 2 types of these products have been supplied to the Ukrainian market - soffit panels in 2 standard colors, and D4.4 wall panels in 8 colors. Grand Line uses the most modern equipment and high-quality components from the USA with ASTM standard support for their production.

Technologies used in the production of Grand Line siding:

• increased shock resistance from ShockProof GL
• resistance to deformation - TermoProof GL system

The Grand Line® AMERIKA vinyl siding has been successfully tested for UV resistance (Xenotest). The test for resistance to ultraviolet radiation was made in Europe, in a certified laboratory of Holland Colors (Holland). We tested ordinary (taken from mass production) D4.4 Grand Line® AMERIKA siding panels and brown T4 Grand Line® AMERIKA soffit produced at a factory in the city of Obninsk (Kaluga Region). The test time is March-July 2011. According to the conclusion of Holland Colors experts, the xenotest test confirms the written guarantee that the Grand Line® AMERIKA vinyl siding will be UV resistant for 11 years.

Advantages and disadvantages of the manufacturer

Although Grand Line siding is produced in Russia, it meets all Western quality standards. The material has successfully passed tests confirming its resistance to fading, impact resistance and uniformity of thickness of panels.

Other benefits of Grand Line vinyl siding include:

• Long service life (up to 50 years).
• Low price in comparison with foreign analogues.
• Simple installation that does not require alignment of the walls.
• Resistance to temperature changes, moisture, mold.
• Good ventilation to prevent condensation.
• Resistance to burning and melting. Grand Line siding belongs to the group of moderately combustible materials.
• Subsequent painting and any other processing of the panels is not required.
• Wide color palette and the ability to simulate natural wood.
• In the manufacture of panels, a special Sunproof GL color protection formula is used.
• Antistatic properties. Thanks to special additives, the material repels dust particles.

The disadvantages of siding Grand Line are insignificant. But it must be borne in mind that if damage to the panels occurs, the only repair method will be to replace damaged areas of the coating.

Installation work can not be done in the cold season, as at minus temperatures the siding becomes less flexible. Also, panels lose their properties when improperly stored, unprofessional installation, contact with abrasive and chemical substances.

Pros and Cons of Grand Line Siding

The first thing I want to note when considering the brand of the domestic manufacturer Grand Line is its distinguishing features from similar materials produced by competitors.

During the production of Grand Line siding, the climatic and weather conditions of the Russian Federation were taken into account and due to this the material is able to withstand strong wind gusts, frosts and has a high level of strength.

In addition, Grand Line siding has enough a large number of advantages:

1. The production of Grand Line vinyl siding is based on American technology. To obtain materials using components that were developed by American and European manufacturers. It contains 100% PVC siding, which is used by the largest American company that uses PVC in production. Besides, Grand Line factory is equipped with modern technical equipment, the latest production equipment. Thanks to the use of such technologies in combination with the latest equipment, the quality of materials is obtained at a high level.
2. Not fadeable. Thanks to a special system with UV protection, which was also developed together with the American popular concern Penn Color, the material is not exposed to ultraviolet rays and retains its original color for a long time. The warranty period for the preservation of color light is 11 years. Even dark colored material retains the saturation of its pigmentation and does not fade in the sun.
3. Construction of the facade can be started at any time of the year, regardless of the weather.. Grand Line siding is equipped with a shockproof system, which makes it possible to install siding at any time of the year. The test results of such a material established that the installation can be carried out even in a temperature condition of 10 degrees Celsius. This test result is on par with one of the best American siding manufacturers. In addition to these tests, impact resistance was also tested, the value of which is 4.23 J. This impact resistance indicator exceeds 10 times the domestic materials for house sheathing.
4. Grand Line manufacturer guarantees siding life of 50 years, while the material will not crack, swell or delaminate.
5. Variations of colors are very diverse, you can choose the right color for the embodiment of the most daring design ideas. In addition to plain siding panels, the manufacturer also produces panels that have a wood texture. Any of the varieties of siding, which has a tree pattern, is made as realistic as possible. With the help of such coloring of materials, it is possible to give the house a beautiful natural look of wooden finisheswhile saving on fairly expensive wooden siding.
6. Grand Line siding material is not contaminated. This is due to equipping it with dirt-repellent properties, because special antiseptic substances are added to its composition. Additionally, it has the ability not to accumulate static electricity, which allows the material to repel dust particles and plant pollen. Given the terrain that the panels possess, the facade pollution is minimized.
7. The panels are equipped with a special lock connection.. Such a device allows the panels to fit together very tightly, after they are connected. Thanks to this design, siding panels laid nearby not exposed to even the strongest winds and hurricanes. In addition, such a lock reduces the time for installing materials up to two times. It is quite difficult to disassemble the design of the connection with such a lock.
8. Along with the siding panels themselves, you can purchase materials similar in design in order to build a drainage system and a fence. All elements are made in the same style, which is convenient enough for arranging a beautiful unique design of a private house.

Unlike other brands

Since the Grand Line siding is aimed at the Russian consumer, it is made taking into account local climatic conditions. The panels are equipped with special anti-hurricane locks that increase the ability of the coating to withstand wind loads.

Harsh winters have also been taken into account. In the manufacture of panels, a unique ShockProof system is used, which increases the strength of the material. Thanks to it, the coating retains impact resistance even at a temperature of -20 ° C.

Color scheme

The Grand Line siding palette consists of calm pastel shades, there are about 20 in total. Some colors are considered rare, it is almost impossible to find them from other manufacturers.

On the official website of Grand Line, you can find the full palette. Making a choice will be easier if you use the manufacturer's color matching chart.

The most popular shades are:

• white,
• grey,
• peach,
• light green
• vanilla,
• beige,
• yellow,
• caramel
• bog oak.

Color affects not only the appearance, but also the price of the material. For example, vanilla and beige shades are cheaper than others, and bog oak is one of the most expensive.

Type of siding

Grand Line manufacturer produces two main types of siding - vinyl and metal. He also makes spotlights, panels for the facade and components - trims, corners, etc.

Vinyl siding externally imitates wood. There are several varieties of this material:

• Model GL "Karelian". The panels are not only similar to the texture of wood, but also repeat the rounded shape of the timber. With their help, you can give the house a cozy look that resembles a traditional log cabin.
• GL model "Ship beam". This type of panel accurately imitates a pine board. The material is great for decorating frequent homes and industrial buildings.
• GL model “Siberian”. Its distinguishing feature is its compact size. Reduced width facilitates wall cladding of complex configuration, minimizing trimmings.
• Siding is vertical. The material also imitates the beam and differs from other panels only in the direction of installation. More about the advantages and disadvantages of vertical siding?

Specifications

According to the data stated by the manufacturer, the Grand Line siding remains strong even at subzero temperatures. Tests have shown that at t -10 ° C the average impact resistance is 4.23 J. At room temperature, this figure was 10 J. In both cases, the impact resistance is higher than that of other Russian brands, but somewhat inferior to Canadian-made material.

Siding Grand Line, depending on the type, has the following parameters:

Type of material

Length cm

Width of the working surface, cm

A distinctive feature of the original panels is the uniformity of staining, the absence of spots and the stability of shades. The product has certificates confirming the fire safety of the material, its compliance with GOST and sanitary and epidemiological standards.

Lifetime

The average life of a siding is up to 30 years. But Grand Line, thanks to the use of new protective technologies, have achieved an increase in this period to 50 years. The manufacturer guarantees throughout the life of the material the absence of cracking, swelling and delamination of the panels under the influence of climatic factors.

The claimed color retention of the coating is 9 years. For white and brown shades, this rule only applies if they are not in direct sunlight. As it burns out, the color is lost evenly, so the overall appearance of the coating will not be affected.

Mounting Features

You can mount Grand Line vinyl panels at any time of the year if the air temperature is not lower than -5 ° С. They are fixed in accordance with the following rules:

• siding is placed only on top of the crate,
• during installation it is not allowed to use additional elements made of metal,
• screws are screwed into the center of the mounting holes so that they do not cut into the material and allow the panels to move.

Training

Before installing the siding, wall preparation is mandatory. They are checked for integrity and the absence of protruding elements. The surface is cleaned of the remnants of the previous coating, if any.

Next, the lathing is mounted. For siding Grand Line, it is recommended to use a metal profile of types ПП 60/27 and ПН28 / 27, used in the installation of drywall. The distance between the vertical elements of the crate should be 30-40 cm.

Separately, the profile is mounted horizontally below and above the openings, along the lower and upper boundary of the walls. Vertical bars are also installed on each side of the corners of the building. Horizontal and vertical elements are not connected to each other, so as not to impede normal ventilation of the coating. More about how to attach a profile for siding?

Profile fastening is carried out using suspensions. If wall insulation is planned, their vapor barrier is preliminarily performed. After fixing the suspensions, insulation plates and wind protection are mounted.

Fixing horizontal and vertical siding

When the crate is ready, proceed with the installation of the siding. The panels are fixed with aluminum or galvanized self-tapping screws with a round hat (its inner surface should be flat), while it is better to use a screwdriver. The length of the screws should allow them to be deepened into the wall by at least 2 cm.

Siding is mounted in the following sequence:

1. Starting bar.
2. Panels of external and internal corners.
3. Fastening connecting H-profiles.
4. Installation of the finishing strip and J-profile.
5. Installation of wall panels.

All of these items can be ordered on the manufacturer’s website or purchased in conjunction with the main panels. Wall siding is mounted from the bottom up, starting from the starting bar. Each new panel is tucked into previously fixed additional elements and is latched by the lock from the previous one. After this, the siding is attached to the crate with screws.

If there is a need to trim the panels, a sharp knife-cutter, scissors or a hacksaw for metal can be used for this. Also, a grinder operating at a low speed is suitable to prevent overheating and melting of the material. If pruning passes through the mounting hole, a new one is made next to the cutter.

Installation of vertical siding differs slightly. It requires a horizontal crate, the installation of panels starts from one of the corners, the lower edge is formed by the facing strip, and the upper - by the J-profile. Otherwise, the technology is identical to the installation of a horizontal coating.

Correct installation guarantees a long and trouble-free operation of vinyl siding. Otherwise, the panels may become deformed, lose their characteristics and appearance. Therefore, if you do not have the appropriate skills, it is worth delegating the work to builders.

Grand Line vinyl panels are an example of a worthy combination of price and quality. They are easy to operate, resistant to external influences and able to last more than 50 years. Grand Line siding will be a good solution for those who want to quickly decorate the facade of the building and support the domestic manufacturer.

Material Features

Currently, the manufacturer has launched the production of high-quality finishing products for the decoration of facades of residential buildings and buildings for other purposes:

• facade vinyl siding and spotlights of different colors,
• front vertical siding of different colors,
• front block house,
• decorative system from "Grand line",
• metal version of siding in various colors,
• eco-beam and block house of the Shipboard series,
• wall sheeting,
• fiber cement siding,
• decorative and functional elements of various colors.

The most popular vinyl and metal types of siding are “Grand line”. The metal version of the siding panels is able to give the facade of buildings not only an aesthetic appearance, but also allows you to hide external communications, including piping and electrical wiring.

Vinyl and metal types of siding panels protect the facades of buildings from atmospheric precipitation and almost any mechanical stress, and also allow you to perform additional warming of the premises without losing the useful area inside.

A rich palette of colors, convenient sizes, easy installation and positive feedback make the products from this company indispensable for finishing work.

The most popular vinyl and metal types of siding "Grand line"

Specifications

Installation of metal siding and vinyl siding panels should be focused on the technical performance of the finishing material.

Technical parameters of the vertical vertical version of the S-6.3 siding panels from Grand line:

• indicators of total length - 3 meters,
• indicators of useful width - about 16 centimeters.

Technical parameters of the vinyl version of the siding panels “Block House” D-4.8 from “Grand line”:

• indicators of total length - 3 meters,
• indicators of useful width - 24.4 centimeters.

Technical parameters of the vinyl version of the siding panels D-4,4 from "Grand line":

• total length indicators - 3.6 meters,
• useful width parameters - 22.5 centimeters.

Technical parameters of the vinyl version of the D-4 siding panels from Grand line:

• total length parameters - 3 meters,
• useful width parameters - 20.3 centimeters.

Technical parameters of the T4-America spotlights:

• overall length parameters - 3 meters,
• working width parameters - 30.3 centimeters.

Installation of metal siding and vinyl siding panels should be focused on the technical performance of the finishing material

Technical parameters of the T3-America spotlights:

• overall length - 3 meters,
• working width - 22.9 centimeters.

The metal version of the EcoBrus-GL siding panels has the following parameters:

• total width indicators - 34.5 centimeters,
• useful width parameters - 32 centimeters,
• length indicators - from 0.5 meters to 6 meters.

The metal version of the block house siding panels has the following parameters:

• total width indicators - 39 centimeters,
• indicators of useful width - 36 centimeters,
• length indicators - from 0.5 m to 6 m.

The metal version of the shipboard siding panels:

• overall width parameters - 39 centimeters,
• useful width parameters - 36 centimeters,
• length parameters - from 0.5 meters to 6 meters.

Metal siding panels "Vertical":

• total width parameters - 20 centimeters,
• useful width parameters - 17.6 centimeters,
• profile with a height of 14.5 mm,
• length - 0.5-6.0 meters.

Types of material

The manufacturer produces several varieties of finishing materials that have very positive reviews from Russian consumers.

Metal siding is represented by several types.

• Ecobrus, which is an imitation of glued beams. Material coatings can be represented by polyester, Quarzit-Matt, Quarzit, Quarzit-Lite Velur, Safari, Colority-Print, and Atlas.
• Block househaving the geometry of panels in the shape of a log, which makes the resemblance to a natural tree simply ideal. It has a reliable hidden clutch and is made with a protective film.
• "Shipboard" represented by a classic profile that simulates the plating of a conventional board.
• Vertical siding "Vertical"with a classic look. It includes the series “Vertical-classic”, “Vertical-gofr”, “Vertical-prof”, “Vertical-line”.

The manufacturer produces several varieties of finishing materials that have very positive reviews from Russian consumers.

Vertical version of siding:

• decorative finishing system from Grand Line-NEW,
• vinyl vertical siding panels S-6,3,
• vinyl siding panels finishing "Block House" D-4.8,
• vinyl siding panels finishing D-4,4,
• vinyl siding panels finishing D-4,
• spotlights based on vinyl.

Installation Rules

The material "Grand line" belongs to the category of materials that are very convenient for lining. Installation of siding panels is carried out in accordance with the paragraphs attached to the manufacturer's instructions. In addition, depending on the type of material, installation may involve significant differences.

Most often, self-installation of vinyl siding panels from the Grand line is carried out. The installation scheme is standard for vinyl finishing material from any manufacturers and includes the following sequential actions:

• surface preparation for installation of the crate frame, including the elimination of large defects and the dismantling of the elements that interfere with the installation of panels,
• installation of the lathing under the siding panel, as well as, if necessary, laying of heat-insulating plates and film wind protection,
• installation of a counter-lattice to create a ventilation gap between the finish and the facade or trim and insulation,
• installation of components in the manner provided for by the technology of installation of finishing siding panels,
• serial installation of the main panels.

Self-assembly should be carried out according to the instructions using the recommended tool kit.

The company "Grand line" offers consumers a high-quality, reliable and durable version of the facade materials. Self-assembly should be carried out according to the instructions using the recommended tool kit.

Watch the video: How to Build a Garage #6 Metal Siding (December 2024).