What are the sizes of built-in refrigerators and cabinets?

Your repost will change the Internet :)

The modern built-in refrigerator fits perfectly into the interior of the kitchen without violating the overall design concept. All models of built-in household appliances are designed for fastening facades of those materials that are used in the kitchen. Overall dimensions allow you to install the device in a single level with kitchen furniture. Installation of small models is made under the countertop.

The interior of standard and small refrigerators is equipped with many functional shelves, pull-out sections, containers for fruits / vegetables and meat products. On the doors, as in conventional refrigeration appliances: a place to store eggs, medicine, tall bottles, cans, sauces and more. The freezer, as expected, is located above or below the main compartment.

Standard sizes

The height of the built-in refrigerators varies between 177 ... 200 cm - the size is determined by the technical requirements for installation (the gap between the ceiling and the equipment for air circulation).
Width 54 ... 56 cm - the dimension is calculated taking into account the fact that the device is built into a standard 600 mm cabinet (the interior of the furniture minus two thicknesses of material from which the kitchen set is made).
Depth no more than 55 cm - so that there is a gap between the wall of the room and the rear wall of the built-in equipment, in order to avoid overheating of the device.

The depth of the small refrigerator corresponds to standard sizes. But the height is designed for installation of equipment under the countertop of the kitchen set - 820 mm. There are also models with average dimensions of height in the range of 900 ... 1100 mm. Such refrigerators are equipped with independent freezers, or are built into a single case with an oven and a microwave. The width of the small integrated device is 595 ... 597 mm. To install it, you do not need to make a separate cabinet - the refrigerator is simply placed in an opening of 600 mm between the two lower cabinets.

Displacement

When choosing a built-in refrigerator, you need to pay attention not only to the overall dimensions, but also to the internal volume. The volume of a refrigerator depends on its direct purpose and the number of family members.

1 person - 120 ... 150 l,
2-3 people - 120 ... 200 l,
3-4 people - 200 ... 300 l,
5 or more - over 300 liters (the larger - the better).

Schemes and drawings

The dimensions of the kitchen cabinet for built-in appliances are calculated individually, based on technical recommendations from specific manufacturers. Below are general diagrams of how to integrate a refrigerator (small or large) into the closet of a kitchen unit.

Self-installation of the overall built-in equipment is greatly simplified thanks to the detailed recommendations and drawings of the manufacturer. In addition, the technical characteristics indicate the principle of calculating kitchen facades with all the necessary gaps.

Pros

high degree of sound insulation due to additional external panels (facades),
profitability due to thermal insulation of adjacent kitchen cabinets,
aesthetic appeal, “inconspicuous” - the outer doors are made of the same material and color as all the facades of the kitchen set,
the possibility of mounting not only on the floor, but also on top of the countertop, or on the shelf of a kitchen cabinet,
installation in the kitchen, in the office, in the living room, hallway and so on.

Photo in the interior

The built-in refrigerator is a great alternative to conventional refrigerators. Due to the fact that it is possible to install facades directly on the appliance doors, built-in models do not look too massive and bulky even in small rooms.

Standard dimensions

Consumer demand for such equipment is growing steadily every year, the sizes of models for embedding are very different: for the office kitchen, for a large family, and for a hotel room.

p, blockquote 12,0,0,0,0 ->

p, blockquote 13,0,0,0,0 ->

Before ordering a furniture set, you need to decide on the dimensions of the cabinet for the built-in refrigerator. And for this you need to choose a model.

p, blockquote 14,0,0,0,0 ->

First of all, you need to determine the height of the model. The most ergonomic models are considered to be options that do not exceed 2 meters in length, it is better to lower them, then it will be convenient for all households to use them.

p, blockquote 15,0,0,0,0 ->

p, blockquote 16,0,0,0,0 ->

You can find heights of 70 cm, and 80 cm, and 120 cm, and 190 cm from different manufacturers - take the time to choose, consider whether to buy a refrigerator with the largest volume, if at home it’s not customary to cook for the future and stock up with pickles- jams? Maybe, in this case, a model of standard height (one and a half meters) is suitable for preparing the freshest food?

p, blockquote 17,0,0,0,0 - ->

p, blockquote 18,0,0,0,0 ->

If you opt for a small refrigerator height, make sure it is convenient to use. A small pedestal will raise the refrigerator to eye level, and it will be a pleasure to get food out of it.

p, blockquote 19,0,0,0,0 ->

The following parameters of equal importance: width and depth. You just have to choose exactly what width of the refrigerator is best suited for the needs of your family: 45 cm, 50 cm, 60 cm, 70 cm, 90 cm, etc. The depth of the models differs step by step by 5 cm: 40 cm, 45 cm, 50 cm ...

p, blockquote 20,0,0,0,0 ->

If we talk about the standard width, then this is 60 cm, and the standard depth is 55 cm.

p, blockquote 21,0,0,0,0 ->

How to determine the size? Fortunately, manufacturers took care of the recommended figures for the volume of the refrigeration part, depending on the number of family members. Of course, the numbers are approximate, but you can build on them when determining the model you need.

p, blockquote 22,0,0,0,0 ->

So, for a small family of one or two people, a technique of 100-120 liters is suitable. For three people - about 150 liters, for four - 180 liters. If the family is larger, pay attention to the Side by Side models, they will be optimal, because their size can be the largest.

p, blockquote 24,0,0,0,0 ->

Built-in refrigerators can have several chambers: a freezer, a wine room, a freshness zone, etc. They differ in size, temperature, and humidity level. Similar models have the highest price. We will talk more about the freezer and the wine cabinet below.

p, blockquote 25,0,0,0,0 ->

The most affordable in terms of cost are two-chamber (with a large or small freezer) and single-chamber options. In the latter case, the freezer is purchased and installed separately.

p, blockquote 26,0,0,0,0 ->

Compact technology

p, blockquote 27,0,0,0,0 ->

Small refrigerators, built-in under the countertop, are in demand not only in homes, but also in hotels and offices. They are very convenient, because the furniture can be used as a bedside table (for office equipment or a TV), or as a working area of a kitchen set.

p, blockquote 28,0,0,0,0 ->

Small-sized refrigerators, as a rule, are single-chamber (do not have a freezer compartment). Standard width and height of compact refrigerators: 60 cm and 82 cm, respectively. The depth is 55–57 cm.

p, blockquote 29,0,0,0,0 ->

If necessary, a freezer is bought in, which is also built into the furniture set, these works must be thought out in advance.

p, blockquote 30,0,0,0,0 ->

p, blockquote 31,0,0,0,0 ->

Separate modules

Another popular trend is the installation of individual refrigerator modules in different areas of the kitchen and dining room. For your convenience, you can place the compartments of different designations in the places of your home that are comfortable for you.

p, blockquote 32,0,0,0,0 ->

Lemonade and beer - into the living room, closer to the sofa and home theater, freezer - into the corner of the kitchen, you don't look there very often, the module for fresh fruit and vegetables - into the work area, it is most in demand, etc.

Choose the size of the modules, the purpose and location only for you, no one knows better than you the habits and needs of your family members.

p, blockquote 34,0,0,0,0 ->

It is reasonable to assume that the cost of individual modules is not the most affordable, but if this does not stop you, then you will enjoy the comfort and functionality of the acquired built-in equipment for many years.

p, blockquote 35,0,0,0,0 ->

Freezer

An inconspicuous installation is indispensable in everyday life - this is how one can characterize the acquisition of an integrated model of the freezer. Long-term high-quality storage of food stocks is guaranteed to you by manufacturing companies, there are no random names here. At the end of the article you will find the rating of the best models.

p, blockquote 36,0,0,0,0 ->

With modern food freezing, the maximum of their useful substances and vitamins is preserved, is it any wonder that an increasing number of housewives are thinking about purchasing a separate freezer? Pay attention to the built-in models, they will fit perfectly into any interior design.

p, blockquote 37,0,0,0,0 ->

p, blockquote 38,0,0,0,0 ->

What are the advantages of the built-in freezer? The same as the built-in refrigerated cabinets described in our article.

p, blockquote 39,0,0,0,0 ->

An important point: in case of a sudden (emergency) power outage, the low temperature inside the freezer remains for up to three days, during which time, of course, any problem will be fixed.

Your stocks will not be affected due to the high thermal insulation properties of the cabinet and the characteristics of similar models. As for the placement of the freezer in the interior, then you can choose a model for almost any room. The size range of cabinets varies quite widely. For example, the width can be from 56 to 60 cm, the height from 70 to 89 cm, the depth from 55 to 62 cm.

p, blockquote 41,0,0,0,0 ->

Wine cabinet

p, blockquote 42,0,0,0,0 ->

A collection of favorite wines should certainly be stored in appropriate temperature conditions, a built-in wine cabinet (sometimes called climatic) is in every way an ideal option and a modern analogue of ancient wine cellars.

p, blockquote 43,0,0,0,0 ->

There are also traditional wine cooler cabinets, but we advise you to take a closer look at the built-in models. You can easily fit them into the interior of the living room, dining room or kitchen by putting it in a closet or column.

p, blockquote 44,0,0,0,0 ->

p, blockquote 45,0,0,0,0 ->

Various manufacturers offer a wide range of home-built wine cellars to choose from: from narrow to wide models, with one door or 2-door. Accordingly, the sizes vary greatly. You can buy a cabinet the size of a full refrigerator or choose a small model with a height of about 80 cm. It all depends on your needs.

p, blockquote 46.1,0,0,0 ->

It is very important to consider the capacity of the wine cabinet. It is measured not in liters, as is the case with a standard refrigerator, but in bottles. Accordingly, you can focus on how much alcohol you need to store. A bottle of Bordeaux, the volume of which is 750 ml, is considered to be a conventional unit of measurement. The "bottle" capacity indicator is indicated by the manufacturer in the documentation that came with the wine cabinet.

p, blockquote 47,0,0,0,0 ->

p, blockquote 48,0,0,0,0 ->

Most often, wine cabinets have a glass door; they are not hidden like ordinary refrigerators or freezers behind the dull wooden facades of a furniture set. Such a wine cabinet can look like a showcase decorating any room, because such cabinets can be purchased in any style solution: from classic to high-tech.

p, blockquote 49,0,0,0,0 ->

Wine is a moody product, afraid of high and low temperatures, sunlight, humidity changes. In addition, glass bottles pose a potential threat to children and pets, so the purchase of a separate unit of household appliances that will ensure the safety of your drinks is a reasonable and responsible decision.

p, blockquote 50,0,0,0,0 ->

If you ask why, in this case, do not store wine in a normal refrigerator compartment, along with, for example, dairy products, then the answer lies in the special temperature conditions (above + 10 ° C) and humidity (above 50%), which are required for their proper storage.

Everywhere: under the countertop of the bar, in a pillar next to the sofa in the living room, in a narrow pencil case in the dining room - a stylish wine cabinet fits perfectly into the interior.

p, blockquote 52,0,0,0,0 ->

Other characteristics

In our article, let's take a closer look at other basic characteristics (except for the dimensions and volume of the camera) of built-in household appliances.

p, blockquote 53,0,0,0,0 ->

p, blockquote 54,0,0,0,0 ->

Defrosting

p, blockquote 55,0,0,0,0 ->

In modern stores, there are two types of household appliances: with a classic (drip) system that requires regular defrosting, and No frost, which does not require it. The second option is more convenient to use and modern.

p, blockquote 56,0,0,0,0 ->

power usage

p, blockquote 57,0,0,0,0 ->

If the iron or vacuum cleaner does not work all day and night, and the power consumption is not one of the decisive factors when buying, then when buying a refrigerator, we must remember that it will work day after day, year after year without rest. Electricity bills should not upset the homeowner, so it's time to talk about the power consumption of a domestic refrigerator.

p, blockquote 58,0,0,0,0 ->

We remind you that built-in models consume less energy than classic individual refrigerators due to high-quality thermal insulation. Power depends on the size of the model, the characteristics of its performance.

p, blockquote 59,0,0,0,0 ->

The energy class of an individual model is assigned taking into account the volume of the refrigerator, the presence of the No frost system and other characteristics. The most common markings are A and A +, these are modern models with reduced energy consumption, which means more economical.

p, blockquote 60,0,0,0,0 ->

p, blockquote 61,0,0,0,0 ->

Number of cameras

p, blockquote 62,0,0,0,0 ->

About them it was already mentioned above in the article, they can be from one (refrigerating or freezing) to several.

p, blockquote 63,0,0,0,0 ->

Number of compresses

p, blockquote 64,0,0,0,0 ->

Their number depends on the number of compartments of the refrigerator, may be from one to several. Accordingly, a larger number of compressors increases the power consumption of the model.

p, blockquote 65,0,0,0,0 ->

The operating efficiency of the compressor and its energy consumption depend on a number of parameters:

p, blockquote 66,0,0,0,0 ->

the size of the refrigerator and (or) freezer,
the temperature of the kitchen
camera tightness
the frequency of opening the doors of household appliances.

p, blockquote 67,0,0,0,0 ->

External coating material

p, blockquote 68,0,0,0,0 ->

The surface of modern refrigerators can be made of plastic or metal. Metal is a more expensive and durable choice, plastic is more affordable in price, and it is also quite durable. The outer coating of wine cabinets can be made of wood.

p, blockquote 69,0,0,1,0 ->

Type of door attachment

If your decision is to completely remove the refrigerator behind the facades of the furniture set, pay attention to the type of fastening it to the opening door.

p, blockquote 70,0,0,0,0 ->

Skid system

p, blockquote 71,0,0,0,0 ->

If the model you have chosen is equipped with a skid system, then similar skids should be attached to the inside of the facade of the furniture set. When you open the cabinet door, the panels will move relative to each other. The disadvantage of this type of fastening is that the door cannot be opened wide (opening angle 90 °).

p, blockquote 72,0,0,0,0 ->

Hinge system

p, blockquote 73,0,0,0,0 ->

This option is more reliable and comfortable for further operation of the refrigerator. Wider door opening angle (up to 115 °). The doors of both items (both the refrigerator and the cabinet) are connected by fixed fixtures.

p, blockquote 74,0,0,0,0 ->

Basic installation rules

p, blockquote 75,0,0,0,0 ->

We draw your attention to the basic rules for installing refrigerators, it does not matter for the kitchen, office or hotel:

p, blockquote 76,0,0,0,0 ->

remoteness from other household appliances (hobs, oven, microwave, etc.),
the size of the niche should exceed the size of the built-in equipment for air ventilation,
to ensure ventilation, the back of the refrigerator should not be in contact with anything,
remoteness from the room heating system,
for air movement, a grill is installed in the lower part of the cabinet.

We draw your attention to the fact that professionals should be involved in the installation, this guarantees you the safe operation of equipment and compliance with all the subtleties of the installation.

p, blockquote 77,0,0,0,0 ->

p, blockquote 78,0,0,0,0 ->

Schemes for embedding in a cabinet or niche

How to calculate the size of the pencil case and box for the built-in refrigerator? How to find out the size of the doors of a furniture set, behind which household appliances will be hidden?

p, blockquote 79,0,0,0,0 ->

When embedding equipment, the dimensions of the cabinet or niche should be taken into account, taking into account the necessary ventilation. That is, the cabinet or niche should be wider, higher and deeper than the model of the refrigerator you have chosen. The back of the cabinet should be out for better air movement.

A reasonable question arises, but how to calculate the size of the cabinet, having on hand a certain model of the refrigerator? How spacious should it be? On a millimeter on the sides is a little, and ten centimeters is a lot? Let's look for a middle ground. Below on the diagrams you see the dimensions of the cabinets and their facades for built-in refrigerators.

p, blockquote 81,0,0,0,0 ->

p, blockquote 82,0,0,0,0 ->

Before designing a cabinet for built-in appliances, you must familiarize yourself with the instructions for its use. It usually indicates the minimum allowable distance from the walls of the refrigerator to the surrounding cabinet. Also, when embedding refrigerators in a niche, care must be taken to install the grilles below and through air movement.

p, blockquote 83,0,0,0,0 ->

Strictly speaking, even your own creation of a cabinet will not require any special skills from you. All that is needed is to measure the equipment, add the ventilation tolerance to the results and create a simple drawing, an example of which you see above. The most basic cabinet consists of two side walls and a “ceiling”.

p, blockquote 84,0,0,0,0 ->

You can do without a bottom if the refrigerator is equipped with legs. The back wall is not needed at all, so ventilation will be better. So that the case does not fall apart, a pair of transverse reinforcing battens or boards should be installed. They are mounted instead of the back wall.

p, blockquote 85,0,0,0,0 ->

p, blockquote 86,0,0,0,0 ->

Rating of the best models

Top 5 most capacious:

p, blockquote 87,0,0,0,0 ->

Liebherr SBS 66I3 (Side-by-Side, 4 cameras, height 177 cm, width 111.8 cm),
Liebherr SBS 70I4 (Side-by-Side, 3 cameras, height 177 cm, width 111.8 cm),
Kuppersbusch KEI 9750-0-2T (Side-by-Side, 2 cameras, height 180.5 cm, width 91.6 cm),
Gaggenau RY 492-301 (Side-by-Side, 2 cameras, height 202.9 cm, width 90.8 cm),

p, blockquote 88,0,0,0,0 ->

KitchenAid KCBPX 18120 (Side-by-Side, 2 cameras, height 202.7 cm, width 120 cm).

Top 5 smallest:

p, blockquote 89,0,0,0,0 ->

Smeg ABM32-2 (minibar, 1 camera, height 49 cm, width 40 cm),

p, blockquote 90,0,0,0,0 ->

Beko BU 1100 HCA (mini fridge, 1 camera, height 82 cm, width 59.8 cm),
Hotpoint-Ariston BTSZ 1632 / HA (refrigerator, 2 cameras, height 81.5 cm, width 58 cm),
Liebherr IK 1664 (refrigerator, 2 cameras, height 87.2 cm, width 55.9 cm),
Smeg U3C080P (mini fridge, 1 camera, height 81.5 cm, width 56 cm).

Top-3 separate freezers:

p, blockquote 91,0,0,0,0 ->

Bosch GIV 11 AF 20 R (height 71 cm, width 56 cm),
Liebherr IGN 2756 (height 139.5 cm, width 55.9 cm),

p, blockquote 92,0,0,0,0 ->

Zanussi ZUF 11420 SA (height 81.5 cm, width 56 cm),
Liebherr IGN 1664 (height 87.2 cm, width 54 cm),
Electrolux EUN 1100 FOW (height 81.5 cm, width 56 cm).

Features and benefits of choosing built-in models

Built-in models have many other advantages. For the most part, they are quite roomy, but at the same time they are smaller in size. This will significantly save you space, especially since not everyone can boast extra square meters.

There are no problems with the choice. Manufacturers made sure that everyone could choose the technique to their taste and for every need. On the market are presented not only full-sized refrigerators, but also mini-models that can be easily mounted in any angle.
Some housewives prefer to use several freezers at once for a large number of products. By hiding them under the doors of kitchen cabinets with a single facade, you can achieve a more aesthetic appearance.
Energy efficiency is an important advantage. Due to the powerful thermal insulation, energy consumption is significantly reduced. And thanks to external panels, additional sound insulation is created, which allows the refrigerator to operate silently.

One of the minuses of modern embedded technology is its high cost. But this is obvious. To create the perfect interior will have to try.

If the refrigerator breaks down, it will not be so easy to take it to a service center. First you have to dismantle the equipment. And this, in turn, is additional cash costs. The disadvantages include the lack of electronic control, which reduces the ability to control the exact temperature inside both the refrigerator and the freezer. Next, we’ll talk about the nuances of choosing a built-in refrigerator, about the installation and its dimensions.

How to install the built-in refrigerator

The technique can be of two types. One implies a fully recessed enclosure, the other a partially recessed.

In the first case, the refrigerator “hides” in the entire cabinet. In the second, the back and side walls are built into the pencil case. The front doors are not masked. As a rule, in order for such a refrigerator to fit well into the interior of the kitchen, the headsets are made plain.

Installation of the refrigerator, if desired, can be done independently. Manufacturers provide clear instructions and drawings. Therefore, if you are confident in your abilities, then you can do without a specialist. Otherwise, you should call the wizard.

When installing, clearly follow the simple rules:

Do not place the refrigerator near a stove or other appliance that generates heat. If there is no way out, then remember the minimum distance - approximately 15 centimeters, plus two partitions.
The refrigerator case is exposed in two planes: horizontal and vertical.
Attach the façade to the refrigerator door. Otherwise, frequent openings can contribute to rapid breakdown.
In no case should the rear wall of the equipment come into contact with the wall.
To fully regulate the air, install the refrigerator on a special grill.
Carefully read all the manufacturer’s installation requirements. They are indicated in the product passport. Installation of one model may vary significantly from another.

Important! It is necessary to accurately and correctly measure the place under the refrigerator. Be sure to consider the air gaps. Proper installation will guarantee the safety and reliable operation of the equipment.

Dimensions: Width, Height, Depth

The choice of models of refrigeration units is diverse not only in functional terms, but also in size. Explore all the advantages and disadvantages of individual models and determine the exact dimensions of the new technology. Only then, taking into account the size of the built-in appliances, start choosing a specific kitchen set.

Single chamber options

Single chamber refrigerators for home use are less popular today. They are significantly inferior to their counterparts. They are one compartment, where both the refrigeration and freezer zones are located. Freezing is not so effective, the shelf life of products is reduced. Often ice forms. There are only models with a refrigerator or freezer compartment.

Nevertheless, single-chamber technology also has a place to be. Its main advantage is compactness. Width varies from 55 to 60 cm. Depth - no more than 55 cm. The height of the refrigerator with one camera may be different. If it is a minibar or a freezer, then not higher than 70 cm and not lower than 50 cm. Installed under the countertop - 82 cm. Model only with a refrigerator from 100 to 140 cm. The option of a refrigerator combined with a freezer is up to 177 cm high. Tall models range from 200 to 215 cm.

Two-chamber dimensions

The most sought-after type - two-chamber refrigerators. In this embodiment, both compartments are isolated from each other.

The standard depth, like the rest of the models, is 55 cm. If we talk about the width, it often reaches 90 cm. But there are also narrower ones - from 73 cm. You can also choose a wide option. The width of such a refrigerator can be 120 cm. The height varies from 82 cm to 2 m 13 cm.

Side-by-Side Dimensions

Side-by-Side (“side by side”) - such refrigerators differ in impressive volume. Suitable for a large family or for those who prefer to store food “in reserve”. More than two-chamber analogues in 2 times. Here, the freezer and refrigerator are next to each other, and not under each other. When choosing such a refrigerator, it is worth considering its size. Definitely it is suitable for a large kitchen in an apartment or for your own home. Side-by-side capacity reaches a volume of 600 liters, a freezer - about 300 liters. Depth can be either standard - 55 cm, or greater - from 60 to 72 cm. The width of such a refrigerator is not less than 90 cm, can reach 120 cm. Height is from 177 cm to 2 m.

Dimensions of facades and doors

The dimensions of the facades and doors of refrigerators, as a rule, are determined by the manufacturers and are indicated in the attached instructions. So, the width of the panel should be 2-3 cm greater than the width of the built-in appliances. For example, if the standard width is 90 cm, then the facade should be 92-93 cm. The thickness should vary from 16 to 19 mm. The gap from the refrigerator door to the cabinet is about 3 mm, a little more, but no less.

With proper mounting, the panel covers both the refrigerator itself and all the gaps. Facade installation methods may vary. Usually they are also painted in the instructions. A separate mounting scheme may also be included.

What are the optimal sizes?

To choose the optimal size of the built-in refrigerator, first of all, be guided by your preferences. It is necessary that the new technology fully meets the needs of the family. If you do not engage in frequent homework, you have a small family, then it is better to choose a smaller refrigerator. When storing a significant amount of food, give preference to models more impressive.

Do not forget to pay attention to the functionality. For different options, it can vary significantly. Also, when choosing a refrigerator and its dimensions, consider the capacity of your kitchen. It is important that it does not interfere with the passage and does not occupy an impressive part of the area.

Dimensions of built-in single-chamber refrigerators

Built-in refrigerators with 1 chamber include devices without freezers, models with a small freezer at the top, and freezers. Most models have a standard width of 55 to 60 cm and a depth of 54.4 to 55 cm.

The height of single-chamber models can be very different:

from 50 to 70 cm - for minibars and freezers,
82 cm - for small refrigerators under the countertop,
100-140 cm - for models without a freezer,
177 cm - for full-size models with a freezer,
200-215 cm - for large freezers and devices without a freezer.

Dimensions of built-in two-chamber refrigerators

Models with 2 cameras - the most convenient and popular configuration. Here you can specify only the standard depth of about 55 cm. As a rule, this value is 73 or 88-90 cm, but there are also models up to 120 cm wide, for example, SUB-ZERO ICBBI-48SID / S / TH.

The buyer can choose a two-chamber unit with a height of 82 to 213 cm.

Parameters of Side-by-Side Built-in Refrigerators

Side-by-Side refrigerators with 2, 3 or 4 cameras are suitable for large families, everyone who loves to make homework, owners of their own homes and apartments with large kitchens.

There are not so many built-in Side-by-Side models, but they all belong to the luxury class and attract with a large capacity of up to 600 liters, a freezer compartment of over 300 liters, and excellent internal filling.

Their depth can also be different: along with the standard depth of 55 cm in the Hausdorf store there are 60 and even 72 cm models.

Width varies from 90 to 120 cm, and height - from 177 to 202 cm.

Facades and doors of built-in refrigerators

Each built-in model is accompanied by an installation diagram or instruction, which details the dimensions of the facade and doors with the given device parameters.

The width of the cabinet for installation should be 2-3 cm larger than the refrigerator’s own width. For the most popular two-chamber model Liebherr IKB 3560 with a standard width of 55.9 cm, the width of the door should be 56 to 57 cm.

The thickness of the door itself is recommended to be selected in the range from 16 to 19 mm, the width of the gap between the doors of the refrigerator and the cabinet - at least 3 mm. It is important that the door weight does not exceed the values specified in the instructions for each model.

The facade must be selected so that it completely overlaps both the door of the device and the gaps to the side walls of the cabinet. The method of fastening the facade is also indicated in the instructions. Some manufacturers, for example, Bosch, apply a separate front panel mounting diagram indicating all sizes.

Cabinets, Niches, Boxes

A number of safety requirements are also put forward to the cabinet, niche or duct where the unit is installed, which are usually indicated in the installation instructions or installation diagram.

In general, a cabinet has a base with a height of at least 2 cm and a rear wall with ventilation holes. The minimum value of the ventilation area through the base is 200 square meters. see. A mezzanine can be located on top, the dimensions of which are determined by the height of the room.

The distance to the rear wall of the cabinet from the refrigerator should be at least 5 cm. A gap of 1 cm is also necessary between the refrigerator and the mezzanine. The total height of the cabinet or niche must exceed the height of the refrigerator by 8 cm.

Sometimes a freestanding refrigerator is placed in a box or niche in the kitchen. In this case, the dimensions of the box or niche should also include ventilation:

When installing in a box, which is often done with your own hands, you need to leave a gap of 5 to 10 cm between the rear walls of the device and the box.
If the back wall is not provided, you need to maintain the distance between the refrigerator and the wall for free air circulation.
If a niche is selected for installation of the unit, then first of all determine its depth, which should be 8-10 cm higher than the standard depth of the device, equal to 60 cm.
The distance to the side walls, as well as to the ceiling of the niche, should be at least 10 cm, so that you can easily install the device into it.
Often a refrigerator in a niche or box is placed on a podium (base), in which ventilation holes are also drilled.

A wide range of built-in refrigerators from leading manufacturers in the Hausdorf store will allow each customer to make the best choice.

Advantages and disadvantages of the built-in refrigerator

Most often, those who carefully work on the interior design of their kitchen want to buy a built-in refrigerator.

Many do not like the fact that a free-standing refrigerator is very difficult to integrate into a kitchen set.

In this case, a refrigerator built directly into the cabinet will help out, which allows you to create a harmonious interior in the kitchen.

Remember! Refrigerators can be built-in not only in kitchen furniture, but also in office cabinets, and even in car interiors.

So, in what cases is it worth buying a built-in refrigerator, and when is it better to choose an ordinary, free-standing one?

A built-in refrigerator is suitable for you if:

You cannot decide on the design of the refrigerator-solo: the color does not fit, does not fit into the general style of the kitchen interior, etc.,
You certainly want the refrigerator to be completely invisible, you absolutely do not like the “white cabinet” (even if it is not very white, but, say, steel color),
You are ready to put up with the smaller volume of the refrigerator and freezer, if only the harmony in the design of the kitchen is not violated.

Do not take the built-in refrigerator if:

You cook a lot, and you need a big fridge,
Design is not very important for you, the main thing is the functionality of the equipment,
You really need such "bells and whistles" such as a freshness zone, electronic control on the front of the door, the possibility of making carbonated drinks, etc.,
You are not ready to pay a lot of money for improved thermal insulation, it is more important for you to save.

If you opt for a built-in refrigerator, read on!

Read about the advantages and disadvantages of plastic tables in our article.

Size options for built-in refrigerators

"Dear." That is how in one of Chekhov's plays they called the old and well-deserved closet.

But the refrigerator is also a cabinet, the purpose of which is to store food.

This means that this cabinet should have convenient sections and shelves. It is also important that they should all be placed at such a height that the hostess does not need to stretch or squat, getting the right products.

To appreciate any technique or furniture, they talk about their ergonomics.

That is, they are evaluated in terms of ease of use.

Ergonomics experts believe that the refrigerator should not be higher than two meters.

The optimum height is one and a half meters.

If the built-in refrigerator is smaller, it is better to lift it and place a compact cabinet for vegetables or household items under it.

It would be more convenient to use a small, only about 1.7 m high, refrigerator if it was standing on a stand.

Some housewives choose very small refrigerators that “hide” under the countertop, have a height of up to 85 cm.

Due to the lack of a freezer, you have to set it. An example of such an arrangement is in the photo below.

Remember! Any built-in refrigerator needs to be:

safe
reliable
simple and convenient to use,
accessible for cleaning and tidying up,
beautiful and aesthetic.

Built-in refrigerator dimensions

The dimensions of the refrigerator, its height and width, are determined by the internal parameters that have a niche where it will be placed.

If the built-in refrigerator is installed under the countertop, a special cabinet for it is not done, since the refrigerator is installed directly on the floor between the two cabinets and the sash is attached to the refrigerator door.

Its height is 820 mm, its width is 600, and its depth is equal to the size of the furniture - 550-570 mm.

For a cabinet built-in refrigerator, the dimensions of this cabinet are important, they are indicated in the passport of the refrigerator.

Usually it has the following dimensions: width - 600, depth - 550 mm.

The height may vary, depending on the model of the refrigerator.

Facades for kitchen furniture. Our article will help you figure out which facades for kitchen furniture are more practical.

What materials are best used to make a kitchen apron, and also what is the difference between MDF and HDF, you can read here.

Here is an example of a cabinet drawing and the dimensions of the built-in refrigerator, taken from the passport of one of the built-in refrigerators:

Remember! To avoid serious errors, all overall dimensions must be checked with the product passport.

Installation of the built-in refrigerator

When installing household appliances, the main thing is to ensure electrical safety.

Built-in refrigerators require special attention and special knowledge.

All heating units (compressor or condenser) must be ventilated.

Therefore, in the manufacture of a cabinet for a refrigerator, it is strictly necessary to comply with the manufacturer's recommendations specified in the instrument passport.

Moreover, for different models of refrigerators, these schemes may differ.

So protect yourself from possible problems, check the compliance of the cabinet delivered to you with the requirements specified in the refrigerator passport.

Pay particular attention to the top of the cabinet: check if there is a clearance of 5 cm for the air intake.

Installation of the built-in refrigerator

The installation of built-in appliances in the kitchen should be trusted only by qualified craftsmen.

After all, any inaccuracy can turn into big troubles and a refusal of warranty service.

Watch the video in which the author shows what mistakes can be made when installing the built-in refrigerator and how to avoid them:

Built-in refrigerator design

Built-in refrigerators have a very modest appearance in the store.

They do not sparkle with white lacquer or the muffled sheen of steel surfaces.

The cabinet-fridge gets its final appearance after an external decorative panel is put on a plain door.

And this panel can be of any color, design and style.

Built-in fridge with draw-out freezers

Remember! We pay attention to the technical characteristics of the built-in refrigerator, and not to its design!

Kitchen unit design with built-in refrigerator

Everyone acquires kitchen furniture, guided by their own taste, their own idea of beauty and convenience.

And, of course, financial opportunities.

The refrigerator, built into the cabinet and made in the same color and material as the entire kitchen set, will be an excellent complement to it.

The price of such refrigerators is slightly higher, but this difference is fully compensated by the additional convenience and high ergonomics of the equipment.

We have selected for you photos of the design of the kitchen with a built-in refrigerator. Get inspired!